If you are trying to salvage the floor underneath make sure you do not cut grooves in the floor with the knife.
Easiest way to pull up carpet staples.
If there s a metal nosing at the top of the stairs pry it up to remove it.
Use a hammer to pull out stray tack strip nails or hammer in any nails that aren t flush.
Use the knee kicker to pull the carpet tight as you place another row of staples in the corner between the riser and the tread.
Remove the staples.
The best tool for removing carpet staples is a heavy duty office stapler.
Wear gloves to protect your hands from the staples that hold the carpet in place.
Hold the tool at about a 45 degree angle and slide it forcefully along the floor.
The very flat tip of the heavy duty office stapler will.
Begin at the top of the stairs.
Another way is to remove the carpet in larger pieces and cut it up somewhere else.
Tear out the padding under the carpet.
Flooring installers don t use a cat s paw to remove staples after old carpet has been removed there are just too many of them.
One way to do this is to lift the carpet away from the floor as you cut.
Instead they ve developed a smart efficient way to remove staples with a shovel or long handled floor scraper.
It also shows how to remove carpet pad staples easy https.
How do i avoid damaging the finish on the hardwood.
Use a crow bar to remove the tack strips.
This video will show you the fastest way to remove staples from your floor when taking out carpet.
Repeat the process starting at step 5 as you work your way up the stairs.
Here were our weapons of choice basically all serving the purpose of prying things up carpet tack strips staples at varying levels of detail and care crowbar for yanking up carpet pliers for delicately twisting stuck staples out.
What is the best tool for removing carpet staples.
Carpet tack strips can usually remain in place but look for rust rot or other damage.
To remove carpet from stairs start at the top.
Throw them away as you remove them to avoid accidentally stepping on them.
Pry up the metal nosing and remove it if present.
Use the stair tool to wedge the carpet into the corner between the tread and the riser.
If you are pulling up carpet from stairs.
Removing the carpet tacks and staples.
Once the crowbar helped me loosen a corner or two of the carpet it was fairly easy to just yank it up by hand.
Our were on the treads and the risers.
Continue pulling up carpet a few feet at a time and cutting it into easy to handle strips.